Dynapac CA152A, Maintenance Manual

Page: 14 / 37

12 CA152A M152AEN2
1 2
1
2
EVERY 10 OPERATING HOURS (DAILY)
Brake function – Check
Fig. 8 Control panel
1. Reserve-/parking brake knob
2. Forward/reverse lever
Check operation of the brakes as follows:
Drive the roller slowly forward.
Push the reserve/parking brake knob (1); the warning
lamp on the instrument panel should light and the roller
should stop.
After testing the brakes, set the forward/reverse lever
(2) in neutral.
Pull up the reserve-/parking brake knob.
The roller is now ready for operation.
Water tanks – Filling
Screw off the tank cap (1) and fill with pure
water. Do not remove the strainer (2).
Fill the water tank; it holds 500 litres (132 gal).
Sole additive: Small amount of environment-
friendly antifreeze fluid.
Fig. 9 Rear water tank
1. Tank cap
2. Strainer