Dynapac CA 302, Instruction Manual

Page: 100 / 121

Maintenance - 250h
ICA302-4EN4.pdf 2012-04-12
Rear axle planetary gears - Check oil level
Fig. Level check - planetary gear,
optional
1. Level/Filler plug
Fig. Level check - planetary gear, std
1. Level/Filler plug
1
1
Position the roller with the plug in the planetary gear
(1) in the "9 o'clock" position.
Wipe clean and remove the level plug (1) and check
that the oil level reaches the lower edge of the plug
hole. Top off with oil to the right level if the level is low.
Use transmission oil. See lubrication specification.
Clean and refit the plug.
Check the fluid level in the same way on the rear
axle's other planetary gear.
Drum gearbox - Checking the oil level
Fig. Oil level check - drum gearbox
1. Level plug
2. Filler plug
3. Drain plug
1
2
3
Position the drum so that the filler plug (2) is straight
up.
Wipe clean the area around the level plug (1) and then
undo the plug.
Ensure that the oil level reaches up to the lower edge
of the plug hole.
Top off with oil to the right level if the level is low. Use
transmission oil according to the lubricant specification.
Clean and refit the plugs.
90