Dynapac CA 302, Instruction Manual

Page: 89 / 121

Maintenance, 10h
ICA302-4EN4.pdf 2012-04-12
Air circulation - Check
Fig. Engine hood
1. Hood lock
2. Protective grille
1
2
Ensure that the engine has free circulation of cooling
air through the protective grille in the hood.
To open the engine hood, turn the locking arm (1)
upward. Raise the hood to its fully open position,
checking that the red safety catch on the left gas
spring is latched.
If the engine hood's gas-spring are out of action
and the hood is put at its upper position - block
the hood so that it cannot fall. If the engine hood's gas-spring are out of action
and the hood is put at its upper position - block
the hood so that it cannot fall.
Coolant level - Check
Fig. Water tank
1. Max. level
2. Min. level
3. Filler cap
1
2
3
Check that level of the coolant is between the max.
and min. marks.
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles. Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles.
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specifications in these instructions
and in the engine manual.
Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed. Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
79