Dynapac CA 302, Instruction Manual

Page: 83 / 121

Maintenance - Maintenance schedule
ICA302-4EN4.pdf 2012-04-12
Every 50 hours of operation (Weekly)
Refer to the contents to find the page number of the
sections referred to!
Pos.
in fig Action Comment Pos.
in fig Action Comment
Check that hoses and couplings are not leaking Check that hoses and couplings are not leaking
4 Inspect/clean the filter element in the air cleaner Replace as required 4 Inspect/clean the filter element in the air cleaner Replace as required
17 Lubricate the articulation 17 Lubricate the articulation
20 Check the wheel-nuts are tightened 20 Check the wheel-nuts are tightened
21 Check the tire pressure 21 Check the tire pressure
39 Check the air conditioning Optional 39 Check the air conditioning Optional
Lubricate the strike-off blade bearings. Optional Lubricate the strike-off blade bearings. Optional
Every 250 hours of operation (Monthly)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
23 Check oil level in rear axle/planetary gearing 23 Check oil level in rear axle/planetary gearing
13 Check oil level in drum gearbox 13 Check oil level in drum gearbox
15 Check oil level in the drum cartridge 15 Check oil level in the drum cartridge
32 Clean the coolers 32 Clean the coolers
20 Check the bolted joints The above applies to new
or reconditioned
components only 20 Check the bolted joints The above applies to new
or reconditioned
components only
24 Check the bolted joints The above applies to new
or reconditioned
components only 24 Check the bolted joints The above applies to new
or reconditioned
components only
16 Check rubber elements and bolted joints 16 Check rubber elements and bolted joints
30 Check battery 30 Check battery
39 Check the AC Optional 39 Check the AC Optional
73