5
TECHNICAL DATA
BG70 Europe
P/N 368678
BG70 USA
P/N 368942
Operating weight Kg-(lb) 300-(551)
300-(551)
Working Width mm-(in) 1830-(72)
1830-(72)
Blade speed (rpm)
70 to 160
70 to 160
Number of blades
2x4
2x4
2 Smoothing disks
yes
yes
Overlapping no
no
POWER UNIT
Make Honda
Honda
Model
GX 620
GX 620EPA CARB
Rated power KW-(hp) 15-(20)
15-(20)
At (rpm)
3600
3600
Gasoline tank capacity l-(gal)
14-(3)
14-(3)
Water tank capacity
15 – (3.2)
15 – (3.2)
Consumption l/h-(gph)
1,5 – (0.32)
1,5 – (0.32)
Noise level measured in air at 1m from the
power floats dB(A), according to ISO 6081.
DIMENSIONS
L x w x h mm (in)
1016x1930x1315 – (40x76x52)
EQUIPMENT
STANDARD
-
Single pitch control system
-
Electric retardant spray system
-
Hour meter
-
Set of 8 blades
-
3 Halogen lights
-
Lifting hooks
OPTIONS
-
Set of 2 smoothing disks
-
Transport trolley
OPERATING INSTRUCTIONS
BEFORE STARTING
-
Check engine oil level.
-
Make sure that all blades are at the same angle. If necessary adjust the blade angle.
-
Make sure that the safety switch works properly.
STARTING
ALWAYS HAVE THE THROTTLE PEDAL AT IDLE WHEN STARTING ENGINE.
-
Take place on the seat. If the operator is not in place, because of the safety switch, the engine will never start.
-
Pull the choke lever. Only if the engine is cold.
-
Turn the ignition switch key "ON" in order to start engine.
-
After the engine starts push the choke lever and let the engine warm up for two or three minutes at idle speed.
-
Apply throttle pedal slowly. Blades will start to turn. Continue applying throttle until desired speed is obtained.
RAMIRENT
