background image

  3

-

 POWER SUPPLY

 : 

 
 

WARNING

 

 

Make sure that the power supply equipment complies with the relevant safety requirements of the local and the 
international standards.

 

       
 

- Electric machine : It must be ensured that the machine is connected to the voltage and the frequency 

specified on the name plate. The power supply cable has to be properly sized. Check that the cable and the plug of 
the machine are not damaged. Never switch off the machine by pulling the plug from its socket. Use the machine 
switch. Keep the cable out of the moving parts of the machine. 
            
 - 

Pneumatic 

machine : Check that the compressed-air hose and the hose coupling are not damaged. 

Never attempt to loosen a compressed-air hose which is pressurized. First switch off the air at the compressor and 
then leave the machine running itself to discharge the hose after some seconds. 
 
 

- Machine powered by petrol or diesel engine : Petrol has an extremely low flash-point and can be 

explosive in certain situations. Keep away from all hot or spark-generating objects, do not smoke, when handling 
fuel. Wait until the machine has cooled before filling the tank. Avoid spilling petrol or diesel on the ground.   
 
 
-

 STARTING THE MACHINE 

 

CAUTION

 

 
 

Before starting make yourself familiar with the machine and make sure that the machine does not show any 
obvious faults. Then start the machine according the instruction and spare parts catalogue.

 

 
 
-

 OPERATION 

 

CAUTION

 

 
 

Use the machine only for the purpose for which it is intended. Make sure you know how to stop the machine 
quickly in the event of an emergency situation. Do not touch rotating parts during operation.

 

 
 
-

 MAINTENANCE 

 

CAUTION

 

 
 

Maintenance work must only be carried out by skilled personnel. Keep unauthorized persons away from the 
machine. Do not carry out maintenance work while the machine is moving or the engine is running. Never use a 
machine which is damaged.

 

  
 
-

 BE ALERT 

 

CAUTION

 

 
 
Always concentrate on what you are doing. Use common sense. Never operate the machine if you are tired or 
under the influence of drugs alcohol or other substances which can affect your vision, reaction, ability or 
judgement

.

 

 
 

RAMIRENT

Summary of Contents for BG70








Reviews: