G.729 (20/40/60/80
ms)
-priority Priority
preference of installed codecs.
G.723
G.711U
G.711A
G.729
-volume
Specify the following levels:
voice volume (0~63, default: 25),
input gain (0~38, default: 25),
dtmf volume (0~31, default: 23),
Dynamix IAD -162 Gateway
-nscng
No sound compression and CNG. (G.723.1 only, On=1, Off=0).
-echo
Setting of echo canceller. (On=1, Off=0, per port basis).
-mindelay Setting of jitter buffer min delay. (0~150, default: 90).
-maxdelay Setting of jitter buffer max delay. (0~150, default: 150).
Example:
voice -send g723 60 g711u 60 g711a 60 g729 60
voice -volume voice 20 input 32 dtmf 27
voice -echo 1 1 1 1
usr/config$
Parameter Usages:
-print: Print current voice information and configurations.
-send: To define packet size for each codec. 20/40/60/80 ms mean to send a
voice packet per 20/40/60/80 milliseconds. The smaller the packet size, the
shorter the delay time. If network is in good condition, smaller sending packet size
is recommended. In this parameter, 20/40/60ms is applicable to G.711u/a law,
20/40/60/80 ms is applicable to G.729 codec, while 30/60ms is applicable to
G.723.1 codec.
-priority: Codec priority while negotiating with other SIP device. The codec listed in
left side has the highest priority when both parties determining final codec.
usr/config$ voice –priority g723 (only select this codec)
usr/config$ voice –priority g723 g729 g711u g711a (select four codecs, and
g723 is the first choice)
-volume: There are three adjustable value.
--voice volume stands for volume, which can be heard from Gateway
side(range 0~63, default: 28).
--input gain stands for volume, which the opposite party hears (range 0~38,
default: 28).
--dtmf volume stands for DTMF volume/level, which sends to its own Line
- 83 -
