4.3.3 System Configuration
Dynamix IAD -162 Gateway
Click [System Configuration] in the navigation panel and open the [System
Configuration] Screen.
-
Keypad DTMF Type:
set DTMF type. User can select DTMF type IAD
transmits.
-
RFC2833 Payload Type:
change RFC2833 Payload type. This is for special
request from the other site, if RFC2833 payload types of 2 sites are different, it
may cause some problem of connection.
-
FAX Payload Type:
Change FAX payload type of IAD.
-
Inter Digit Time:
Set the DTMF inter digit time (second)
To set the duration (in second) of two pressed digits in dial mode as timed out.
If after the duration user hasn’t pressed next number, IAD will dial out all
number pressed (The inter digit time range is 1~10 secends).
-
Caller ID Type
: Set Caller ID function. If user set disable, IAD won’t display
caller ID on Phone set when if receive caller ID information from remote site.
User can also select caller ID type to be FSK, DTMF or NTT according on
which type your phone set supports.
-
Busy Forward:
Set enable or disable to route the call to the next line (While the
line number is not matched or engaged).
-
End of Dial Digit:
select end of dialing key, e.g. set end of dial key as * button,
after finished pressing dialing number then press * will dial out.
- 50 -
