manualshive.com logo in svg

Dynamix DW IAD-162, User Manual

Share
Download
Dynamix DW IAD-162 User Manual Download Page 75

Dynamix IAD -162  Gateway  

-print 

Display LAN information and configuration.

 

-mode 

Specify WAN IP mode (0=Static, 1=DHCP, 2=PPPoE).

 

-ip 

Specify WAN ip address.

 

-lanip 

Specify LAN ip address.

 

-mask 

Set Internet subnet mask.

 

-gate 

Specify default gateway ip address

 

-nat Set 

NAT 

service 

flag 

(On/Off). 

 

-sntp 

Set SNTP server mode and specify IP address.

 

-autodns 

Specify the way to obtain DNS Server (0:Manual/1:Auto).

 

-dns 

Specify IP address of DNS Server.

 

-timezone  Set local timezone.

 

-ipsharing Specify usage of an IP sharing device and specify IP address.

 

-id 

PPPoE connection user name.

 

-pwd 

PPPoE connection password.

 

-reboot 

Reboot after remote host disconnection in PPPoE mode

 

(0=No Reboot, 1=Yes Reboot).

 

-echo 

PPPoE Echo Request (0=disable, 1=enable).

 

-emsip 

EMS server address.

 

-emsid 

EMS user name. 

 

-emspwd EMS 

user 

password.

 

-emstime EMS 

refresh time(0~1024 min). 

Note:

 

Range of ip address setting (0.0.0.0 ~ 255.255.255.255).

 

SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode). 

Example:

 

ifaddr -mode 0

 

ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254

 

ifaddr -lanip 192.168.123.123

 

ifaddr -nat 1

 

ifaddr -sntp 1 210.59.163.254

 

ifaddr -ipsharing 1 210.59.163.254

 

ifaddr -autodns 1

 

ifaddr -dns 1 168.95.1.1

 

ifaddr -id [email protected] -pwd 123456 -reboot 1

 

 

 

usr/config$

 

 

 

 

Parameter Usages:

 

-print: Print current IP setting and status 

 

 

- 70 - 

Summary of Contents for DW IAD-162







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands