4.3.5 Phone Configuration Screen
Dynamix IAD -162 Gateway
Click [Phone Configuration] in the navigation panel and open the [Phone Configuration]
Screen. For tone simulation, IAD Gateway adopts dual frequencies as traditional
telephone does. If users want to have their own call progress tone, they can change
the value of tones.
-
Ring Tone:
Set Ring frequency, on time, off time, voltage level. IAD will give
ring to phone set to trigger ring. If user found that phone set cannot ring when
having incoming call, please try to increase ring frequency here.
¤
ringing frequency: 15 ~ 100 (Unit: Hz)
¤
ringing ring ON/OFF: 0 ~ 8000 (Unit: ms)
¤
ringing level: 0 ~ 94 (Unit: V)
¤
tone frequency: 0 ~ 65535 (Unit: Hz)
¤
tone freqLevel: 0 ~ 65535 (Unit: mVrms)
¤
tone Tone ON/OFF: 0 ~ 8000 (Unit: ms)
-
Ring Back Tone:
Set ring back tone parameters.
-
Busy Tone:
Set busy tone parameters.
-
Dial tone:
Set Dial tone parameters.
¤
Low(frq) : Frequency value of Low frequency
¤
High(frq) : Frequency value of High frequency
¤
Low(lev) : Level (volume) of Low frequency
¤
High(lev) : Level (volume) of High frequency
- 52 -
