usr/config$
Dynamix IAD -162 Gateway
Parameter Usages:
-print: print current setting in security command.
-line: Specify which line number you want to set into the account
Note: If you have only one account, you can set into line1 or line2 using this
parameter. For example, if you set the account into line1, line1 can accept
incoming calls.
-name: Specify the username of your account information.
-pwd: Specify the password of your account information.
For example:
usr/config$ security -print
Line1 account information
Username :
1001
Password :
***
usr/config$
5.3.14 [voice]
The voice command is associated with the audio setting information. There are
four voice codecs supported by Gateway.
usr/config$ voice
Voice codec setting information and configuration
Usage:
voice [-send [G723 ms] [G711U ms] [G711A ms] [G729 ms] ]
[-volume [voice level] [input level] [dtmf level]]
[-nscng [G711U used1] [G711A used2] [G723 used3]]
[-echo used] [-mindelay t1] [-maxdelay t2]
voice -print
voice -priority [G723] [G711U] [G711A] [G729]
Display voice codec information and configuration.
-send
Specify sending packet size.
G.723 (30/60
ms)
G.711U (20/40/60 ms)
G.711A (20/40/60 ms)
- 82 -
