Command with FXS Gateway
-rtp RTP port number (2326~65534), Default: 16384
Example:
sip -px 210.59.163.171 -line1 70
usr/config$
Figure 19-23 sip commend list
Parameter Usages:
-mode
Configure as Proxy mode or Peer-to-Peer mode (0: Peer-to-Peer mode, 1: Proxy
mode).
-px
to specify Proxy address when FXS Gateway is in proxy mode.
Proxy address can be IPv4 address or DNS name.
-domian specify the domain name such as “sipcenter.com” and it will be presented in the
URL([email protected]).
-prefix
when your username contains alphabets, for example sip1123, then specify the
prefix string as “sip”.
-line1
assign line 1 number.
-line2
assign line 2 number.
-expire
this parameter is used to inform proxy server the valid duration of the registration
information.
-port
SIP local UDP port which uses to listen incoming SIP Messages.
-rtp
Specify the RTP received port number.
Note:
One will need to configure port and rtp parameters only when you deploy two or
more sets behind the IP sharing device (Router).
usr/config$ sip -print
Run Mode : PROXY MODE
Proxy address : 10.1.1.2
Proxy port : 5060
Domain : null
Prefix string : null
Line1 : 1001
Line2 : 1002
SIP listen port : 5060
RTP receive port : 16384
Expire : 3600
usr/config$
Command List
19-26
