Command with FXS Gateway
Usage:
sysconf [-idtime digit] [-bf digit] [-keypad dtmf]
[-faxtype type][-2833type type][-lcdrop ON/OFF]
[-droptime digit][-eod digit]
sysconf -print
-print Display system overall information and configuration.
-idtime Inter-Digits time.(1~10 sec)
-bf BusyForward.(ON:1 / OFF:0)
-keypad Select DTMF type: 0=In-band,
1=RFC2833.
-faxtype FAX Payload Type (range:96~128 inter-used:100,102~105)
-2833type RFC2833 Payload Type (range:96~128 inter-used:100,102~105)
-lcdrop Disconnect Supervision(Loop Current Drop) (ON:1 / OFF:0)
-droptime Period of Loop Current Drop (ms)
-eod End of Dial Digit setting(0: none, 1: *, 2: #)
Example:
sysconf -keypad 0 -eod 2
usr/config$
Figure 19-21 system information commend list
Parameter Usages:
print current settings
-idtime
set the duration(in second) of two pressed digits in dial mode as timed out. If
after the duration user hasn’t pressed next number, LAN Phone will dial out all
number pressed.
-bf
Only working in Proxy mode. If the line1 is engaged as well as this function is
enabled, the line2 will be ringing.
-keypad DTMF replay type. When value is “1”, FXS Gateway will transfer DTMF signal
via RTP payload as defined in RFC2833. When the value is set to “0”, the DTMF
type is set as In-band.
-faxtype FAX Payload Type. Rrange:96~128 inter-used:100,102~105.
-2833type RFC2833 Payload Type. Range: 96~128 inter-used:100,102~105.
-lcdrop
Disconnect Supervision (Loop Current Drop) (ON:1 / OFF:0).
-droptime Period of Loop Current Drop (ms).
-eod
to define end of dial digit.(0: none, 1: *, 2: #).
Command List
19-24
