manualshive.com logo in svg

Dynamix DW - 01/S, User Manual

Share
Download
Dynamix DW - 01/S User Manual Download Page 70

Command with FXS Gateway 

19.4.4 PPPoE 

Mode 

ATU-R ADSL Modem

User ID:

Password:

FXS-4B Gateway

 

 

Press [?] or [help] to list all commands, including PPPoE one. 

Step 1.

 

pppoe –dev 1 : switch the IP configurations to PPPoE 

Step 2.

 

pppoe –open : open the connection 

Step 3.

 

pppoe –id : input the user ID provided by your ISP 

Step 4.

 

pppoe –pwd : input the password provided by your ISP 

Step 5.

 

pppoe –reboot : Reboot the device once after disconnection 

 
After the configurations are done, [commit] and [reboot] the device. 
The PPPoE configuration procedures are shown below, 

1.  Setting the ADSL (PPPoE) account obtained from ISP 

Sample account: 

User name: [email protected] 
Password:  abcd1234 
Command:

 

usr/config$ pppoe –id [email protected] 
usr/config$ pppoe -pwd abcd1234 

 

2.  Enable the PPPoE function of FXS Gateway 

Command:

 

usr/config$ pppoe -dev 1 

 

3.  Save the configuration and initiate the PPPoE connection. 

Command:

 

usr/config$ commit 
usr/config$ reboot 

 

Command List 

 

   19-11

Summary of Contents for DW - 01/S
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands