Command with FXS Gateway
usr/config$ sysconf -print
System information
Inter-Digits time : 3
BusyForward : OFF
Keypad DTMF type : In-band
End of Dial Digit : #
RFC2833 Payload Type : 96
FAX Payload Type : 101
Disconnect Supervision : OFF
Loop Current Drop Time(ms) : 500
usr/config$
Figure 19-22 sysconf –print commend list
19.7.12 [sip]
This command is to configure SIP related parameters.
usr/config$ sip
SIP stack information and configuration
Usage:
sip [-mode pxmode]
sip [-px address] [-domain domain] [-prefix prefixstring]
[-line1 number] [-line2 number]
[-expire t1] [-port udpPort] [-rtp rtpPort]
sip -print
-print Display SIP stack information and configuration.
-mode Configure as Proxy mode or Peer-to-Peer mode.
-px Proxy server address. (Proxy IPv4 address or Proxy dns name)
-pxport Proxy server port. (the port of proxy)
-domain Specify domain name in the URL (if domain name is not used,
specify as null)
-prefix Specify prefix string, use it when UserID contains alphabets
(if UserID uses numerals, specify as null)
-line1 TEL1 Phone number.
-line2 TEL2 Phone number.
-expire The relative time after which the message expires(0 ~ (2^31-1))
-port SIP local UDP port number (5060~5070), Default: 5060
Command List
19-25
