Command with FXS Gateway
Parameter Usages:
print out current contents of Phone Book. Users can also add
index number
, from
1 to 100, to the parameter to show specific phone number.
Note:
<index number> means the sequence number in phone book. If users do
request a specific index number in phone book, FXS Gateway will give
each record a automatic sequence number as index.
-add
add a new record to phone book. When adding a record, users have to specify
name
,
IP
, and
e164
number to complete the command.
-search
search a record in phone book. The searching criteria can be
name
,
IP
, or
e164
.
-delete
delete a specific record. “pbook –delete 3” means delete
index 3
record.
-insert
add a new record and force to assign a specific index number for it.
-modify modify an existing record. When using this command, users have to specify the
record’s index number, and then make the change.
PhoneBook Rules:
The e164 number defined in phone book will fully carry to destination. It is not just a
representative number for destination’s IP Address. In other words, user dial this e164
number to reach destination, destination will receive the number and find out if it is
matched to its e164, including Line number in some particular device.
usr/config$ pbook -print
index Name IP E164
===================================================================
1 test1 192.168.4.73 200
-------------------------------------------------------------------
usr/config$
Figure 19-18 pbook –print commend list
19.7.10 [pppoe]
Display PPPoE related information.
usr/config$ pppoe
PPPoE device information and configuration
Usage:
pppoe [-print]|[-open]|[-close]
pppoe [-dev on/off][-id username][-pwd password]
Command List
19-22
