FXS Gateway Overview
Chapter 10
Phone Pattern Screen
This Chapter covers FXS Gateway progress tone is configurable. Default tone value is set
according to U.S. tone specification. Users may adjust the values according to their own
country’s tone specification or users-defined tone specification.
10.1 Phone Pattern Overview
The web configurator provides Phone Configuration screen.
10.2 Phone Pattern Screen
Click
Phone Pattern
in the navigation panel and open the
Phone Pattern
Screen.
Figure 10-1 Phone Pattern
The following table describes this screen.
Table 10-1 Phone Pattern Configuration
LABEL DESCRIPTION
Ring Tone
Setting the played tone type, when FXS Gateway is receiving a call.
Ring Back Tone
Setting the played tone type, when FXS Gateway receives a Q.931
Alerting message. In condition that FXS Gateway is the originate side.
Busy Tone
Setting the played tone type, when destination is busy.
Dial Tone
Setting the played tone type, when hook off a phone set of workable FXS
Gateway.
2nd Dial Tone
Set the detective flash range in ms, for example, 300-500 ms.
Phone Patterm Screen
10-1
