Dynamatic EC 2000, Instruction Manual

Page: 20 / 46

20
Figure 14: Relay 1-4 Connection Diagram
5.3 Hardware Setup
•
There are several 3 contact male pin headers on the board with a jumper either occupying
the center and left pins (position A) or the center and right pins (position B). Below is a list
of jumper settings for the EC 2000. All jumpers not listed should be left in the default
position.
Table 1: EC 2000 Jumper Settings
Jumper Parameter Position A Position B
J2 Follower Operation Pulse Pickup Tachometer Generator
J4 Speed Control Feedback
Pulse Pickup
(TB2: 1,2,3)
Tachometer Generator
(TB1: G1/G2)
J5 Clutch Current Scaling 5.5A Max 8A Max
J6 Brake Current Scaling 5.5A Max 8A Max