Dynalink RTA230, User Manual

Page: 7 / 88

Before You Use
vii
Before You Use
Thank you for choosing the Asymmetric Digital Subscriber Line (ADSL) Router. With the
asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL allows
you to have both voice and data services in use simultaneously all over one phone line.
ADSL Router is designed to offer cost-effective high-speed services for home or office users. It
provides a downstream rate of up to 8 Mbps and upstream rate of up to 1 Mbps for ADSL connection,
even offers auto-negotiation capability for different flavors (G.dmt, G.lite, T1.413 Issue 2 and so on)
according to central office DSLAM’s settings (Digital Subscriber Line Access Multiplexer). Also the
feature-rich routing functions are seamlessly integrated to ADSL service for existing corporate or
home users. Now users can enjoy various bandwidth-consuming applications via ADSL Router.
Features
ADSL Compliance
For Annex A model (RTA230,RTA231)
ANSI T1.413 Issue 2
ITU G.992.1 Annex A (G.dmt)
ITU G.992.2 Annex A (G.lite)
ITU G.994.1 (G.hs)
Support dying gasp
For Annex B model (RTA231B)
ITU G.992.1 Annex B (G.dmt)
ITU G.994.1 (G.hs)
ATM Features
Compliant to ATM Forum UNI 3.1 / 4.0 Permanent Virtual Circuits (PVCs)
Support UBR and CBR with traffic shaping
RFC2684 LLC Encapsulation and VC Multiplexing over AAL5
RFC2364 Point-to-Point Protocol (PPP) over AAL5
8RFC2225 Classical IP and ARP over ATM
RFC2516 PPP over Ethernet: support Relay (Transparent Forwarding and Client functions)
Support PPPoA or PPPoE Bridged mode (the IP address got from ISP can be passed to the
user’s PC and behave as the IP address of the user’s PC.)
OAM F4/F5 End-to-End/Segment Loopback Cells
Bridging Features
Supports self-learning bridge specified in IEEE 802.1D Transparent Bridging
Supports up to 4096 learning MAC addresses
Transparent Bridging between 10/100 Mb Ethernet and USB