Dynalink RTA230 Page 46 User Manual Download

Page: 46 / 88

ADSL Router User Manual

Advanced Setup

LAN- IP Address

This page is the same as you can see in the

Configure LAN side Settings

page while running the

Quick Setup

. It allows you to set IP Address and Subnet Mask values for LAN interface.

Primary IP Address:

Type in the first IP address that you got from
your ISP for your LAN connection.

Subnet Mask:

Type in the subnet mask that you got from
your ISP for your LAN connection.

Configure the second IP Address and
Subnet Mask for LAN interface:

Check this box to make another set of IP
Address and Subnet Mask to connect to your
router if they are not included in the range
that DHCP server accepts.

Secondary IP Address:

Type in the second IP address that you got
from your ISP for your LAN connection.

Subnet Mask:

Type in the subnet mask that you got from
your ISP for your LAN connection.

Apply:

Click this button to activate the settings
listed above.

LAN-DHCP Server

This allows you to set DHCP server on LAN interface.

Enable DHCP server on the LAN:

Check this item if DHCP service is needed
on the LAN. The router will assign IP
address, gateway address for each of your
PCs.

Start IP Address:

Type in the start point IP address.

End IP Address:

Type in the end point IP address.

Leased Time:

Type in the duration for the time. The default
is 1day.

Apply:

Click this button to activate the settings
listed above.

Summary of Contents for RTA230

























































































Search results

Summary of Contents for RTA230

Reviews:

Related manuals for RTA230

Brands by name

Popular brands

Dynalink RTA230, User Manual

Search results

Summary of Contents for RTA230

Reviews:

Related manuals for RTA230

Brands by name

Popular brands