dynabook SATELLITE C50-H Maintenance Manual Download Page 136

Page: 136 / 161

4 Replacement Procedures

4.6 LCD Module Assembly

Satellite C50-H/C40-H

Maintenance Manual

4-15

4.6 LCD Module Assembly

NOTE: Touch SKU will provide the FRU parts as LCD Module Assembly.

Removing LCD Module Assembly

Remove LCD Module Assembly according to the following procedures and Figure 4-17.

Remove tape for fasten LCD cable.

Remove PC gasket from WIFI module

Remove plastic chips on wifi module.

Disconnect LCD cable from CN6 on system board.

Released wireless antenna cables from top cover latch.

Open LCD Module Assembly at an angle of 90 degrees.

Remove six M2.0x5.5x4.5 black Phillips head screws securing LCD Module

Assembly with top cover.

Remove LCD Module Assembly.

Figure 4-17 Removing the LCD Module assembly

Summary of Contents for SATELLITE C50-H



























































































































































Search results

Summary of Contents for SATELLITE C50-H

Reviews:

Related manuals for SATELLITE C50-H

Brands by name

Popular brands

dynabook SATELLITE C50-H, Maintenance Manual

Search results

Summary of Contents for SATELLITE C50-H

Reviews:

Related manuals for SATELLITE C50-H

Brands by name

Popular brands