dynabook SATELLITE C50-H, Maintenance Manual

Page: 72 / 161

NO.
CONT.ON 25 PAGE NO.24
Copyright (C) 2020 Dynabook Inc., All Rights Reserved.
This test will read out the CPU fan speed it reached, and checks if it meets the speed requirement, if the test is NG, it will show as red
and pause like above, you can press any key to exit and end this test as NG.
3) Test Result
As previously picture shown, if there is NG, it will pause and the result will be NG.
If the test finished OK, it will show as green and then quit the test after a while and the test result will be OK.
■
In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
■
In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
4) Test file
CPUFan.exe: Test program.
4-1-6 BATTERY OFF Test (Setting) [Rev01]
1) Test contents
This test sets the battery off. And it run only once at the end of all other tests.
(Note: after the test/setting, you can only turn on the PC after power adapter (AC) plugged-in, and this is what “Shipping Mode” for.
2) Test screen
Since it is suggested to set batter off without power adapter (AC) on, so the tool will first check the AC status.
If the power adapter (AC) is on, above message box will be appeared, please un-plug power adapter (AC) first, then click “OK”.
If the power adapter (AC) is still plugged-in, this message box will be popped-up again after clicked “OK” or “X”.
NOTE: After power adapter (AC) unplugged and battery off setting, DO NOT plug-in it again before shutting down the PC.