dynabook SATELLITE C50-H, Maintenance Manual

Page: 114 / 161

12
4.2 How to startup the IP3 YangPass Maintenance Tool
4.2.1 Startup Procedure
1) Create a bootable USB flash media of the WinPE Maintenance Tool according to the Create Procedure in Appendix 3.1.
2) Insert the created USB flash media to the target PC that needs maintenance and then turn on the power.
3) After turning on the power, immediately press the [F10] key several times to show the boot device selection screen.
4) Select "UEFI: <USB flash media name>" and press the [Enter] key.
(Below
“UEFI: ADATA USB Flash Drive 0.00, Partition 1”
is the created USB flash media as an example.)
5) The IP3 YangPass Maintenance Tool starts up.
6) After WinPE booted up, the initial screen (main menu) is shown like below: