2. Removing the SSD
Please refer to the information below for instructions regarding the identification and removal of the SSD.
Please refer to the information listed in section
4.21
of the
Portege X40-J
Series Maintenance
Manual
to check how the mainboard is removed.
4.13.1
Removing the SSD
To remove the SSD, follow the steps below and refer to
Figure 4-9
.
1. Remove the the following screw and disconnect the
SSD
from
the connector
CN1900
on the SYSTEM board.
Figure 4-9 Removing the SSD
Take care not to press on the top or bottom of a SSD. Pressure may cause the data
loss or damage to the device.
CN1900
SSD
Summary of Contents for PORTEGE X40-J Series
Page 4: ......
