Figure 4-23 Installing the dual button unit/Click pad (3)
SQUARE CUSHION
GASKE T
TAPE
CPAD
6. Connect the
Dual button FPC
to the connector on the Click Pad.
Stick a new stick tape and
INSU D BUTTON PLT
to the dual button
plat in place.
7. Connect the
Accupoint FPC
to the connector on the Click Pad.
8. Connect the
Click Pad FFC
and
Fingerprint FFC
to the connector on
the Click Pad and the connector
CN9510
and
CN9550
on the
System
Board
.
4.16 Speaker
4.16.1
Removing the Speaker
To remove the Speaker, follow the steps below and refer to
Figure 4-24
to
Figure 4-25
.
1. Disconnect the
Speaker harness
from the connector
CN6290
on
the system board.
2. Open the stick tape. Release the
Speaker harness
from the guides.
Figure 4-24 Removing the Speaker (1)
Speaker harness
Summary of Contents for PORTEGE X40-J Series
Page 4: ......
