1. Set the battery pack to the COVER ASSY and secure it with the
screws.
2. Connect the
BATTERY HARNESS
to the connector
CN8021
on
the SYSTEM board and stick one piece of INSU SQUARE in
place.
4.12 Memory module
4.12.1
Removing the Memory module
To remove the memory module, follow the steps as detailed below:
1.
Open the left and right
latches
outside and remove the
memory module(s)
.
Figure 4-7 Removing the memory module(s)
1. Latches
2. Memory module
4.12.2
Installing the Memory module
Check the battery’s terminals visually. If they are dirty, wipe them clean with a dry
cloth.
Do not touch the connectors on the memory module or on the computer. Dust or
stains on the connectors may cause memory access problems.
Never press hard or bend the memory module.
Summary of Contents for PORTEGE X40-J Series
Page 4: ......
