4.22 Keyboard/Cover Assembly
The keyboard is assembled to the Cover Assembly by hot melt glue. When either the
keyboard or the Cover Assembly needs to be replaced with a new one, please
replace them all with a new set of keyboard and Cover Assembly which are already
assembled.
4.22.1
Removing the Keyboard/Cover Assembly
To remove the Keyboard/Cover Assembly, follow the step below and refer to
Figure
4-38
.
1. Release the following screws and separate the
LCD Assembly
and
Cover Assembly.
Figure 4-38 Removing the Keyboard/Cover Assembly
4.22.2
Installing the Keyboard/Cover Assembly
To install the Keyboard/Cover Assembly, follow the step below and refer to
Figure 4-
38
.
1. Set the LCD Assembly on the Cover Assembly and secure them
with the screws.
As the keytop may fall out, when handling the keyboard, always hold it by the frame
and do not touch the key top.
Cover Assembly
LCD Assembly
4 3
Summary of Contents for PORTEGE X40-J Series
Page 4: ......
