Maintenance Manual (960-948)
4-13
Replacement Procedures
1. Insert the
SSD
to the connector
CN1900
on the
System Board
slantwise.
2. Push down the
SSD
and secure it with the screw.
Figure 4-8 Installing the SSD
4.14 Fan
4.14.1 Removing the Fan
To remove the Fan, follow the steps below.
1. Disconnect the
Fan harness
from the connector
CN3380
on the
System Board.
2. Remove the following screws and the
Fan
from the Cover Assembly.
To avoid damage, always hold the SSD only by its sides.
To prevent the SSD from being distorted when installing the SSD pack into
the computer, do not press the center of the SSD pack. Always hold the
SSD pack by its sides.
S2x2.5B
CN1900
1
2
