Maintenance Manual (960-948)
4-11
Replacement Procedures
4.11.2 Installing the Base Assembly
To install the Base Assembly, follow the steps below.
1. Set the Cover Assembly on the Base Assembly while securing the
latch.
2. Secure the Cover Assembly and Base Assembly with the screws.
3. Turn the computer, and open the display.
4.12 Battery pack
4.12.1 Removing the Battery pack
To remove the battery pack, follow the steps below.
1. Disconnect the
BATTERY HARNESS
from the connector
CN8021
on
the System board.
2. Remove the following screws and the battery pack.
Figure 4-6 Releasing the battery pack
Do not reuse the removed screws. Be sure to use new screws.
Take care not to short circuit the terminals when removing the battery
pack. Similarly, do not drop, knock, scratch, disassemble, twist, or bend
the battery pack.
S2x4CT
Battery Harness
CN8021
C
N802
CN8021
Dispose of the used/removed battery pack in accordance with the laws and
ordinances of your local authority.
