22
USE R GUI DE
|
BL UE WAVE
®
F X -1 2 5 0
Table 4.
Alarm Codes and Description
Alarm Code ALARM message
Cause
0x1000
Ctrl Over Temperature (>50
°
C)
The controller temperature is too high.
0x2000
EM x (1,2) not installed
Emitter connection has problems after power up.
0x2001
EM x (1,2) fan error
Emitter fan has no speed.
0x2002
EM x (1,2) over temperature (> 69
°
C)
Emitter temperature is too high.
0x2003
EM x (1,2) over current
Emitter current is too high.
0x2004
EM x (1,2) zero output
Emitter has no current output.
PLC Mode
There are 2 working modes:
Program:
This is the default mode and is operable by the touch screen. Parameters can be stored in the program slots and
called for operation The parameters can be stored in the program slots and called for operation. This is the default mode for
the touchscreen.
PLC:
The system can be controlled by PLC. This mode is triggered by the PLC ENABLE input signal. Please follow the
wiring guide in
Once the PLC mode is on, the PLC mode window (Figure 34) displays.
Figure 34.
PLC Mode Window
