20
USE R GUI DE
|
BL UE WAVE
®
F X -1 2 5 0
Clock and Calendar Settings
1.
On the system settings window, press the time dropdown
arrow.
2.
Press the clock in the window to input the date
and time by using the pad.
3.
Press the back arrow on the top left to exit.
Resetting the
Emitters’ LED ON Time
The emitter on time appears in the gray bar (Figure
28) on the System Settings window.
Once the emitter is on, the LED on time will begin
counting.
If an emitter is changed for a channel, the LED on time
must be cleared for it to recount in that channel.
Press the Reset button located to the right of the
emitter LED on time to clear it.
Changing the Password
1.
Press the change Password button on the system
settings window to enter the Change Password
window.
2.
Press New Password to input the new password.
3.
Press
“C
onfirm New Password
”
and input the new
password again. The two input passwords must be the
same.
4.
Press the back arrow in the left top corner to exit.
System Reset
Press the System Reset button on the System Settings
window to:
•
Reset the password to the default:1234
•
Reset the program names and values to the default
Figure 27.
Clock and Time Input Pad
Figure 28.
Emitter On Time
Figure 29.
Change Password Window
