18
USE R GUI DE
|
BL UE WAVE
®
F X -1 2 5 0
Program Setting
To save your set values in the main window, press program (Table 3, #8) on the main window to enter the program setting
window. You are required
to enter the user’s passwo
rd correctly before the program window (Figure 22) loads.
Figure 22.
Program Window
There are 16 slots for selection. Their default names are Program # (1-16). Only one slot can be selected at a time.
The operation steps are:
1.
Press on a program slot. The program slot will change to blue when selected. The parameters stored in that program slot
will display in the white bar.
2.
Press the Rename button to rename the slot.
3.
Press the Save button to save the current set values (channel number, power, and cure time) to that program slot.
4.
Press the Load button to load the
slot’s value and exit to the main window.
5.
Press the D
elete button to erase a slot’s name and set the stored values of the slot to 0
.
6.
Press the back arrow in the top left corner to exit the program window.
