
Controller Confguration
DYACON Quick-start Guide
5.2.1 Set Network Name And Password
The Access Point Name, SSID, or Network Name is broadcast by the WiFi access point. This,
and the corresponding password, are available from the network administrator.
Dyacon weather stations use the 2.5 MHz WiFi band.
Press
Select
to enter the cell phone settings.
>AP:
Pass:
The weather station controller will immediately begin searching for available networks.
Searching...
A list will be shown on the LCD.
>MyNetwork
SomeOtherNetwork
Use the ▲ (Up) and ▼ (Down) buttons to find your network.
Press
Select
on the desired network.
>AP: MyNetwork
Pass:
Use the ▲ (Up) and ▼ (Down) buttons to advance to the password setting and then press
Select
.
WiFi Password
▓
Use the ▲ (Up) and ▼ (Down) buttons to scroll to the characters of the password.
Press
Select
when the correct character is shown.
WiFi Password
Password123▓
Press
Select
again when all characters have been entered.
>AP: MyNetwork
Pass: ***********
Press
Cancel
to exit setup mode and a second time to return to Acquisition Mode.
>WiFi UTC 00:29:23
Signal: -37 dBm
The home screen will show the Signal strength of the WiFi (updated every 10 s) and the time in
UTC (also knows as Zulu or GMT).
Page 14/22