PMC-700-X00 User’s Manual
DY 4 Systems Inc.
ii
809789 Revision 2 December 2000
Revision History
Copyright Notice
The information in this document is subject to change without notice and
should not be construed as a commitment by DY 4 Systems Inc. While
reasonable precautions have been taken, DY 4 Systems Inc. assumes no
responsibility for any errors that may appear in this document.
No part of this document may be copied or reproduced without the prior
written consent of DY 4 Systems Inc.
The proprietary information contained in this document must not be disclosed
to others for any purpose, nor used for manufacturing purposes, without
written permission of DY 4 Systems Inc. The acceptance of this document will
be construed as an acceptance of the foregoing condition.
Copyright © 2000, DY 4 Systems Inc. All rights reserved.
Trademarks
3Dlabs is a registered trademark of 3Dlabs Inc., Ltd.
Ethernet is a trademark of Xerox Corporation.
OpenGL is a registered trademark of Silicon Graphics, Inc.
PanelLink is a registered trademark of Silicon Image, Inc.
Pentium is a trademark of Intel Corporation.
Permedia is a registered trademark of 3Dlabs Inc., Ltd.
PowerPC is a trademark of International Business Machines Corporation.
Seawind is a trademark of Seaweed Systems, Inc.
VxWorks is a registered trademark of Wind River Systems, Inc.
Windows, Windows NT, MS, and Microsoft are trademarks of Microsoft
Corporation.
X Window System is a trademark of the X Consortium.
All other brand and product names are trademarks or registered trademarks of
their respective owners.
Rev
By
Date
Description
1
BJ
July 2000
First release
2
BJ
December 2000
Corrected Table 3.2 on page 3-8.
Added P0 cable information.
Added information on inserting PMC-700-X00 in PMC slot 1 of a basecard.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
