DY 4 Systems Inc.
Pre-Installation Tasks
809789 Revision 2 December 2000
2-3
Chapter2
Unpacking the Card
Warning
To avoid personal injury or damage to this Circuit Card Assembly,
disconnect the chassis from its power source before removing or installing
any cards.
This Circuit Card Assembly uses components that are sensitive to
electrostatic discharges. It must be kept in its conductive package until
just before you install it. Remove the card from its protective package only
at a grounded workstation while wearing an approved grounding wrist
strap. Avoid touching any metal contacts on the card. Static discharges
can damage integrated circuits.
To unpack the card from its protective package, follow these steps:
1. Unpack the Circuit Card Assembly from the shipping carton in a suitable
work area. If the shipping carton appears to be damaged, request that an
agent of the shipper or carrier be present during unpacking and inspec-
tion.
2. Find the packing list. Make sure all the items on the list are present.
3. Save the packing material for storing or reshipping the card.
4. Make sure the PMC-700-X00 module is firmly attached to the basecard.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com