manualshive.com logo in svg

DWT BWT PERMAQ Pico 10-90, Installation And Operating Manual

Share
Download
DWT BWT PERMAQ Pico 10-90 Installation And Operating Manual Download Page 29

OPM BWT PERMAQ® Pico Rev. 2.0 EN

Operation | 7

EN

29

1) Choose 

Edit SERVICE MENU

 and press the 

OK button

 to confirm.

2) Enter your password and press the 

OK button

 to confirm.

ð

The language selection menu is displayed:

Edit SERVICE MENU

Language/Langue

D=1 GB=2 F=3 NL=4
Language/Langue = 2

3) Select your desired language.
4) Then press the 

↓ arrow button

 to select the next menu item and display the settings and

change them if necessary.

5) Choose 

back

 to close the service menu.

Edit SERVICE MENU

back

System settings

The system settings contain the preset device configurations, the date and time, the settings
for starting up after a raw water alarm, the external hard and soft stop, the device variant, the
Anybus/communication module option and the option for resetting the device to the factory
settings.

Edit SERVICE MENU

SYSTEM SETUP >

FLOW MEASUREMENT >

LEVEL >

Level

This menu contains all the configuration options for the level function and the analogue and di-
gital operation of the device.

Edit SERVICE MENU

SYSTEM SETUP >

FLOW MEASUREMENT >

LEVEL >

If the device is in automatic mode, it is controlled by the level in the purified water tank. A
sample arrangement of the possible switching points in the purified water tank is shown in
chapter 

Electrical connection [

}

 

22].

Flow measurement

This menu contains all the configuration options for measuring the raw water and permeate
flow. If an optional dosing pump is connected (e.g. for antiscalant dosing), it is controlled us-
ing this menu.

Edit SERVICE MENU

SYSTEM SETUP >

FLOW MEASUREMENT >

LEVEL >

Summary of Contents for BWT PERMAQ Pico 10-90

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands