DVTEL CF-4221-00 User'S Installation Manual Download

Page: 45 / 124

DVTel CF-4221-00 Fixed IP Camera User & Installation Guide

6.3.3.1

Basic

Users can choose to connect to the IP Camera with fixed or dynamic (DHCP) IP address. The
IP Camera also provides PPPoE (Point-to-Point Protocol over Ethernet) support for users who
connect to the network via PPPoE.

Get IP address automatically (DHCP)

The camera’s default setting is “

Use fixed IP address

”. Please refer to the previous section

Accessing Camera

for login with the default IP address.

If select “

Get IP address automatically

”, after the IP Camera restarts, users can search it

through the installer program: DeviceSearch.exe, which can be found in “DeviceSearch”
folder in the supplied CD.

Summary of Contents for CF-4221-00





























































































































Search results

Summary of Contents for CF-4221-00

Reviews:

Related manuals for CF-4221-00

Brands by name

Popular brands

DVTEL CF-4221-00, User'S Installation Manual

Search results

Summary of Contents for CF-4221-00

Reviews:

Related manuals for CF-4221-00

Brands by name

Popular brands