DVTEL CF-4221-00, User'S Installation Manual

Page: 67 / 124

DVTel CF-4221-00 Fixed IP Camera User & Installation Guide
64
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when motion is detected. All
options are listed as follows:

Enable Alarm Output
Check the item and select the predefined type of alarm output to enable alarm
relay output when motion is detected.

Record stream to SD Card
Select this item, and the Motion Detection recording will be stored in Micro SD/
SDHC card when motion is detected.
NOTE: Please make sure the local recording (with Micro SD/ SDHC card) is activated
so that this function can be implemented. See section Recording for further details.

Send Alarm Message by FTP/E-Mail
The Administrator can select whether to send an alarm message by FTP and/or
E-Mail when motion is detected.

Upload Image by FTP
Select this item, and the Administrator can assign a FTP site and configure
various parameters as shown in the figure below. When motion is detected,
event images will be uploaded to the appointed FTP site.

Upload Image by E-Mail
Select this item, and the Administrator can assign an e-mail address and
configure various parameters as shown in the figure below. When motion is
detected, event images will be sent to the appointed e-mail address.
NOTE: Make sure SMTP or FTP configuration has been completed. See section Mail