DVTEL CF-4221-00, User'S Installation Manual

Page: 66 / 124

DVTel CF-4221-00 Fixed IP Camera User & Installation Guide
63
If Motion Detection function is activated, the pop-off window (Motion) with indication of
motion will be shown.
When motion is detected, the signals will be displayed on the Motion window as shown
below.
Detailed settings of Motion Detection are described as follows:
Motion Detection
You will be able to turn on/off Motion Detection in System section. Default setting is Off.
Motion Detection Setting
Users could adjust various parameters of Motion Detection in this section.

Sampling pixel interval [1-100]:
The default value is 10, which means system will take one sampling pixel for
every 10 pixel.

Detection level [1-100]:
The default level is 10. The item is to set detection level for each sampling pixel;
the smaller the value, the more sensitive it is.

Sensitivity level [1-100]:
The default level is 80, which means if 20% or more sampling pixels are
detected differently, system will detect motion. The bigger the value, the more
sensitive it is. Meanwhile, when the value is bigger, the red horizontal line in the
motion indication window will be lower accordingly.

Time interval (sec) [0-7200]:
The default interval is 10. The value is the interval between each detected
motion.