DVS SpycerBox Ultra, Hardware Manual

Page: 23 / 72

2-5
Overview
2
1
3
4
5
I
A
Figure 2-5: Overview of the faceplate
The faceplate is built with an integrated backlit DVS logo which indi-
cates the state of the system, i.e. its power-on status: If the DVS logo is
illuminated, the power is turned on; if not, the power is turned off.
The top side of the faceplate is hinge-fastened, while its bottom side is
fixed with magnets. If you need access to one of the hard disks, for ex-
ample, to replace it, you just have to lift the faceplate:
Figure 2-6: Lifting of faceplate
Then you can access the hard disks of the hard disk array (see section
“Hard Disk Array” on page 2-6).
The faceplate can be removed for transport reasons (see sec-
tion “Removal of the Faceplate” on page 5-17).
SpycerBox Ultra
faceplate backlit DVS logo
SpycerBox Ultra