Maintenance
Hard Disk Maintenance
5-6
SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
Figure 5-2: Pulling out the lever
This takes the hard disk installed in the disk carrier out of the system’s
interfaces inside.
5.
Once the interface connections inside the system are severed,
you can pull the disk carrier out of the system.
Now the hard disk is removed from the system and it has to be replaced
in the next step.
Step 2: Replacing the Hard Disk
To replace the hard disk do the following:
1.
Unscrew the screws that fix the hard disk to the disk carrier.
2.
Exchange the broken disk with a new one and assemble it in the
disk carrier with the screws.
After that the hard disk is replaced and the disk carrier with the new
disk has to be reassembled in the system.
Hard disk damages
Significant environmental changes, for example, altitude, voltage,
temperature, shock, vibration, etc., can damage a hard disk.
Handle hard disks with great care.
It is best to use the same brand and type of hard disk again. Otherwise
a loss of performance might occur.
SpycerBox Ultra:
SpycerBox Flex and system disk array:
