Overview
Overview of the Front
2-10
SpycerBox Ultra/Flex | Hardware Guide | Version 3.1
Rohde & Schwarz DVS GmbH
No.
Item
Explanation
1, 2 LAN 1/
2 LEDs
Indicate that a valid network is connected to the first/
second LAN connection at the rear of the system (see
section “ATX Connector Panel” on page 2-13).
3
alarm
LED
This LED indicates that a hardware malfunction has oc-
curred.
4
DVD
Indicates accesses to the DVD drive.
5
mute
In case of a hardware malfunction a system alarm turns
on. By pressing this button the alarm buzzer can be
switched mute. Use a thin, pointed object to press this
button.
Some alarms (e.g. the one in case of a
hard disk failure) are independent of the
system alarm and cannot be switched
mute with the mute button.
6
reset
Resets your system and initiates a warm reboot. Use a
thin, pointed object to press this button.
Data loss
When resetting the system without hav-
ing saved data, data may get lost.
Save your data before resetting the
system.
7, 8 USB po
rts
The USB connectors (universal serial bus) at the front
offer you the possibility to connect other devices such
as memory sticks easily.
9
power The power switch turns the system on or off. The re-
spective state of the system will be indicated by the
R&S DVS logo in the middle of the faceplate (see sec-
tion “Faceplate” on page 2-6).
