DVS Atomix LT, Installation Manual

Page: 16 / 72

1-6
Atomix LT Installation Guide
1.5 Important Notes
The following provides information about warranty and the conformity
of the product. Furthermore, it includes an important note if you want
to unplug cables and some information about optionally available
breakout boxes.
Warranty Information
This product is warranted to be free of defects in materials and work-
manship for a period of one year from the date of purchase. DVS ex-
tends this Limited Warranty to the original purchaser.
In the event of a defect or failure to confirm to this Limited Warranty,
DVS will repair or replace the product without charge. In order to make
a claim under this Limited Warranty, the purchaser must notify DVS or
their representative in writing of the product failure. In this Limited
Warranty the customer must upon DVS’s request return the product to
the place of purchase or send the defective device to a given address
for the necessary repairs to be performed. If the customer is not satis-
fied with the repair, DVS will have the option to either attempt a further
repair, exchange the product or refund the purchase price.
This warranty does not cover:
– Products not developed by DVS Digital Video Systems GmbH.
– Products not used in compliance with the safety instructions
detailed in section “Safety Instructions” on page 1-4.
– Products on which warranty stickers or product serial numbers have
been removed, altered or rendered illegible.
– The costs of installations, removals, transportations, or reinstalla-
tions.
– Costs for transportation damages.
– Damages caused to any other item.
– Any special, indirect or consequential damages, and damages
resulting from loss of use, data or profits, or business interruption.
Declaration of Conformity
This product has been tested according to
the applying national and international di-
rectives and regulations. Further information
about this can be found in section “Confor-
mity Declarations” on page A-11.
Unplugging Cables
If you want to unplug one of the flat cables after its installation on the
board, please observe the following: