DVS Atomix LT, Installation Manual

Page: 31 / 72

2-13
Overview
2
1
3
I
4
A
Figure 2-6: Panels for analog and digital audio
Audio
Panel
Item Explanation
#1 Analog Audio 3.5 mm unbalanced stereo headphone
jack to monitor the audio output
Digital Audio
(AES/EBU) DB-25 connector (female) for audio sig-
nal and LTC in- and output; provides ei-
ther four stereo channels digital audio
(channels 1 to 8) or three channels audio
plus LTC
#2 Analog Audio Without function
Digital Audio
(AES/EBU) DB-25 connector (female) for audio sig-
nal in- and output; provides the digital
audio channels 9 to 16; for Atomix LT
4 BNC the DVS SDK provides special de-
fines to configure the audio channels of
this connector
Prior to the installation of the panels you have to set/check the
jumpers on their printed circuit boards for the appropriate set-
tings (see section “Jumper Settings of the Audio Panel(s)” on
page 3-4).
Analog Audio
Digital Audio (AES/EBU)
audio panel #1 audio panel #2