16
RMO100A Remote Control
7 RMOWin-R3A Software
RMOWin-R3A is a Windows program for working with Micro-Ohmmeters RMO series. It enables the
two-way communication RMO
– PC over USB port. Microsoft Office Excel program must be installed
on the PC.
RMOWin-R3A supports the following functions:
- Controlling and starting RMO when the tests are performed from the PC, the results could be
stored to PC; results reading interval is adjustable,
- The transfer of the test parameters from the local RMO memory to the PC with the possibility of
writing the notes on objects being measured and appropriate comments.
Note:
Using RMOWin-R3A software, a device RMO100A must be operated only from the RMOWin-
R3A.
The transferred data from RMO is possible to:
- Display in the form of tables,
- Download as an Excel file.
Every test reading parameters contain:
- The date and the time of the test,
- The real test-current,
- The voltage on the voltage terminals (Voltage Sense),
- The measured resistance value,
- The memory location,
- The name of the object (tested device) and the useful comments.
7.1 The minimum system requirements
Processor
: Recommended > 500 MHz
Memory
: min 32 Mb
Operating system
: 95/98, NT, XP, 2000
The hard disk space
: > 10 Mb
7.2 RMOWin-R3A installation
To install the RMOWin-R3A software do the following:
- Put the RMOWin-R3A installation CD in the CD-ROM drive,
-
Click on ”Start”,
-
Click on ”Run”,
-
Click on ”Browse”,
- Select the CD-ROM drive,
-
Highlight the ”RMOWin-R3A.EXE”,
-
Click on ”Open”,
-
Click on ”OK”,
- Follow the instructions displayed on the screen,
- When the installation process has been finished - exit the program.
