13
RMO100A Getting Started
Now there are two choices:
Starting a new test with a different current value:
–
press the
STOP
button to change to the starting menu (
Single
or
Contin
),
–
set a new current value and/or another memory position,
–
confirm your entries by pressing the
ENTER
button,
–
start the test by pressing the
START
button.
Starting a new test with the same current value:
–
press the
STOP
button to change to the starting menu (
Single
or
Contin
),
–
press the
ENTER
button to change to the
Ready
state,
–
press the
START
button to run a test.
The current value remains the same as in the previous test, the memory position
increases by one.
If the
Rmax
menu is set to option
On
, once a Single test is finished, RMO100A automatically changes
to the
Rmax
to display the test results in case the measured resistance is equal or greater than
maximum assigned value.
Figure 6-10:
The
Result
menu
showing the test results
obtain in Single test
Max. test current reached
Voltage drop on the test
object
Memory position that
holds the results
Measured resistance of test object
Figure 6-13:
The
Rmax
showing the test
results
Figure 6-11:
The
Result
menu
showing the test results
obtain in Continuous
test
Measured resistance of test object
Memory position that
holds the results
Max. test current reached
Voltage drop on the test
object
