Dutch Pinball
–
Technical Support TBL FAQ
rev 0.51
Page 69 MPF removal and installation guide rel 0.53
Step 1
–
Raise playfield vertical
•
Now we need to raise the playfield to vertical position. Lift if up at the servicebars , pull it
towards you till you hear two clicks (this means the locking mechanism is in place and the
playfield cant drop in the cabinet). Then set it vertical. Let it carefully touch the top part of
the backbox, this to avoid damage. You can put something in between like a cloth to reduce
the chance of damage even further. To make sure it doesn’t drop on your head while working
on it, it is recommended to secure it with a strap. Also, we recommend to put something
over the bowling alley to avoid screws falling into it.
Step 2
–
Remove upper flipper from under the main playfield
•
Next step is to remove the upper flipper. This is connected to the coil below the playfield.
Loosen the screw holding the axis of this flipper and remove the flipper
