Dutch Pinball
–
Technical Support TBL FAQ
rev 0.51
Page 38 hang-ups freeze P3-ROC lost issues faq rel 0.52
Reseat the RAM memory on the PC-board
WARNING: BEFORE DOING THIS, PLEASE MAKE SURE TO TURN OFF THE GAME!
There has been a case reported where reseating the RAM memory on the PC solved this kind of
issues. Especially during transport these can shake ‘loose’ but also vibrations caused by gameplay can
‘loosen’ it.
Depending on the PC it can be equipped with 2x2Gb or 1x4Gb of RAM memory. In this example the
PC is equipped with 1x4Gb RAM but the procedure remains the same.
Just push gently simultaneously the 2 white clips on each side of the RAM memory. That will make it
pop out. After that just push the RAM memory gently back again until the white clips on the 2 sides
are back in place again. Do this for all RAM memory installed.
