Dutch Pinball
–
Technical Support TBL FAQ
rev 0.51
Page 131
MPF kit installation guide rel 1.0
Before installing the MPF kit make sure the game is TURNED OFF!
Package Contents:
-
1x stepper motor with cable harness
-
1x flatcable (spare)
-
1x new reinforced targets
-
1x new cardoor with decal
-
1x new pcb
-
10x 3,5 x 13 Screw Torx 20 (also for spare)
-
10x 3,5 x 9,5 Screw Torx 20 (also for spare)
-
2x M4 screw for cardoor (1 for spare)
-
1 x plastic holder for repositioning rug EOS switch
-
1x new flipperbushing (spare)
-
1x isolation ring
-
1x protection sheet for playfield
Installation
Step 1
–
Remove stepper motor under the main playfield
•
Carefully remove the lockdown bar and playfield glass.
•
Remove all five balls from the Ball Trough!
•
Lift the playfield a bit and pull the playfield a bit towards you as soon as the playfield support
brackets are high enough to do so and rest the playfield onto the front of the cabinet on the
playfield support brackets:
