Dutch Pinball
–
Technical Support TBL FAQ
rev 0.51
Page 68 MPF removal and installation guide rel 0.53
Before removing the MPF make sure the game is TURNED OFF!
This instruction is valid for two types of built TBL:
1.
The built with the latest version boardset and new construction for the cardoor assy (eg
stepper motor connected to the bottom of the MPF). Called Built type A in the manual
2.
The built with the first
boardset and retrofitted with the ‘so
-
called’ MPF kit (eg afterwards
the steppermotor was re-positioned under the MPF). Called Built type B in the manual
The difference is that with the old boardset the con
nector for the opto’s of the scoop is under
the playfield where with the new boardset this connector is placed on the PCB under the MPF.
So Built type A has one connector less to remove.
MPF out of TBL
Step 1
–
remove glass and balls
•
Carefully remove the lockdown bar and playfield glass.
•
Remove all five balls from the Ball Trough!
•
Lift the playfield a bit and pull the playfield a bit towards you as soon as the playfield support
brackets are high enough to do so and rest the playfield onto the front of the cabinet on the
playfield support brackets:
